If your hearing aid Bluetooth is not connecting to your phone, take a breath — this is one problem where the fix is often free and at home. Most connection problems are a pairing that has come undone, not a broken hearing aid.
Work through the steps below in order. They are the standard, safe steps, and they solve the large majority of cases. If you reach the end and your aids still will not stay connected, the last section explains when the problem is inside the aid’s settings — and that is where our lab can help with hearing aid programming.
Quick Checks to Try First
- Restart both the phone and the aids. Turn your phone fully off and back on. For the aids: open and close the battery door, or place rechargeable aids in the charger for a few seconds and take them out. This clears most temporary connection faults.
- Forget the aids on your phone, then re-pair. In your phone’s Bluetooth settings, find your hearing aids and choose “Forget This Device” (wording varies by phone). Then pair them again fresh, following your aid’s app. An old, half-broken pairing is the single most common cause.
- Update the app and your phone. Check your hearing aid app for updates, and install any waiting phone software update. Then try pairing again — app and phone updates frequently restore a connection that stopped working after an update.
- Check the basics. Bluetooth must be on, the phone should be close by (same room, not in another part of the house), and the aids need a fresh battery or a good charge. Also make sure the aids are not still paired to a second phone or tablet nearby.
- Pair one aid at a time if needed. If only one side connects, forget both aids and re-pair, letting each one finish before starting the other.
When to Come In
Bring the aids to us — or mail them in — if any of these sound familiar:
- The aids connect, work for a while, then drop the connection again every day
- One aid connects and the other never appears in the Bluetooth list at all
- The connection failed right after the aids were adjusted, repaired, or updated
- You have re-paired several times and the pairing will not hold
A pairing that keeps failing can mean the aid’s settings need to be reprogrammed, or that a fault inside the aid is interrupting the connection. At Havmeen Hearing Lab in Richardson, TX, we can check the programming and test the aid in our own lab. Standalone programming is $100 for 1 aid or $150 for 2 aids. If the aid also needs a repair, a repair is $275 per aid with a 6-month warranty on parts repaired, and programming is typically included with a repair if you would like it. When parts are in stock, we can often complete the work the same day. If extra work is ever needed, we will call you for approval first.
Common Questions
Does a Bluetooth problem mean my hearing aid is broken?
Usually not. Most cases are a pairing or app issue that the steps above fix at home. A fault inside the aid is more likely when the connection drops daily or one aid never shows up to pair.
How much does reprogramming cost?
Programming is $100 for 1 aid or $150 for 2 aids. If your aid needs a repair as well, programming is typically included with the repair.
Can I mail my aids in for this?
Yes. Mail-in repairs are welcome — tell us on the repair form exactly what the connection does, and include a recent audiogram (within the last year) if you would like the programming adjusted.
Repair or Replace?
Not sure whether your hearing aids can be repaired, or whether you need to replace them? Take our free check — it never gives a hard no, and we diagnose first.
Still not connecting? Call (469) 230-2392 or start your repair online. See our full hearing aid repair services for everything else the lab handles. Email us at Hear@HavmeenHearingLab.com. Walk in at 1401 N Central Expy, Suite 100, Richardson, TX 75080 — Monday–Friday 9–5, Saturday–Sunday 11–2.